White SUNLU PLA+(PLA Plus) 3D Printer Filament 1KG
৳1999
Bambu Lab PVA Filament Water Soluble Support Material for 3D Printing (500g)
৳4970 ৳5770
This is a 500 g spool of PVA filament from Bambu Lab, designed to serve as a water-soluble support material in 3D printing. It’s perfect for PLA and PETG prints that require complex supports—overhangs, internal cavities, and fine detail—because the supports dissolve cleanly in water, leaving finished surfaces smooth and intact.
| Specification | Details |
|---|---|
| Material Type | PVA (Polyvinyl Alcohol) – water-soluble support filament |
| Filament Diameter | 1.75 mm ± 0.03 mm |
| Net Weight | 500 g (0.5 kg) spool |
| Color / Appearance | Clear / translucent support color |
| Compatibility | Works with PLA, PETG; requires dual-extrusion or similar configuration |
| Print Temperature | ~190-210 °C (recommendations may vary depending on printer and setup) |
| Bed Temperature | Around 45-60 °C (if required for adhesion; depends on model) |
| Tolerance / Quality | Tight control on diameter, smooth winding |
| Storage Conditions | Keep dry – vacuum sealed packaging and use desiccants if needed |
| Usage Notes | Good for supports only; dissolve in warm water after printing |
